Product Features

The plastic synchronous belt wheel is installed at the end of the Roller, which separates the driving and conveying areas, making the conveying more stable and featuring high speed and quiet operation.

The key bearing assembly is designed with precision ball bearings and plastic inner/outer sleeves. This design not only ensures an aesthetic appearance but, more importantly, enables the roller to operate more quietly.

The plastic end caps at the roller ends are designed to prevent dust and splashing water from damaging the bearings to a certain extent.

It has greater transmission capacity and is suitable for medium-load conveying.

With a compact structure, no tensioning is required, and the design is simple.

It realizes slip-free synchronous transmission with higher transmission efficiency.

T5 tooth profile design (26 teeth) for higher universality.

It has accurate positioning and can be used with electric rollers to meet the application requirements of the transfer section.

Used in conjunction with PU synchronous belts (recommended configuration), it is suitable for harsh environments such as cleanrooms.

Compared with traditional belt drives, it is not afraid of water (slippage) and can work in certain harsh environments.

It does not require any lubrication, making maintenance convenient.

Different roller center distances match different synchronous belt models. (See attached table)

Suitable for high-speed conveying, with speeds up to 120m/min depending on the roller diameter and length.

Applicable temperature: -5°C to +40°C.